Bài giảng Thực hành CCNA 3 (Number 2)

1. Apply a basic configuration to the router, switchs and wireless router WRT300N

2. Configure switchs with ip addess and default gateway on the management VLAN

3. Configure VTP, VLANs, and ports on the switchs with the information list below.

4. Configure WRT300N with SSID: WRS1 and WRS2 ; configure security use WEP with

pre-share key: 1234554321

5. Configure port security on the S1,S2, S3 and S4 (allow only a single host and Configure

the port to shut down if there is a port security violation).

6. Configure Inter-VLAN routing on R1

pdf3 trang | Chia sẻ: phuongt97 | Lượt xem: 372 | Lượt tải: 1download
Nội dung tài liệu Bài giảng Thực hành CCNA 3 (Number 2), để tải tài liệu về máy bạn click vào nút DOWNLOAD ở trên
BỘ GIÁO DỤC VÀ ĐÀO TẠO TRƯỜNG CAO ĐẲNG CNTT TP. HCM ĐỀ THI SKILL CCNA 3 MÔN HỌC THỰC HÀNH CCNA 3 Mã môn: Dùng cho các ngành: Mạng máy tính Bộ môn phụ trách: Mạng máy tính 1  Full name: _________________________________ Class: _____________ CCNA3 SKILL BASED EXAMINATION Number 2Duration: 90 minutes No documents allowed Configuration requirements: (10 marks) 1. Apply a basic configuration to the router, switchs and wireless router WRT300N 2. Configure switchs with ip addess and default gateway on the management VLAN 3. Configure VTP, VLANs, and ports on the switchs with the information list below. 4. Configure WRT300N with SSID: WRS1 and WRS2 ; configure security use WEP with pre-share key: 1234554321 5. Configure port security on the S1,S2, S3 and S4 (allow only a single host and Configure the port to shut down if there is a port security violation). 6. Configure Inter-VLAN routing on R1 7. Configure workstation correctly: IP Address, Subnet mask, Default Gateway ,DNS server. 8. Enable routing on R1,R2, by using the dynamic routing protocol as OSPF 9. All PCs can access to others and to the Web Server with URL: ( alias ) 2  3  10. Backup the startup configuration file on the devices (Router and Switchs) to the TFTP server VTP on the Switches Switch Name VTP Operating Mode VTP Domain VTP Password S1 Server ITC Cisco S2 Client ITC Cisco S3 Client ITC Cisco S4 Transparent ITC Cisco VLANs on the Switchs VLAN VLAN Name VLAN 99 Management VLAN 10 Faculty-staff VLAN 20 Students VLAN 30 Wireless Port Assignments on the Switchs Ports Assignment Network Fa0/1 – 0/5 802.1q Trunks (Native VLAN 99) 192.168.99.0 /24 Fa0/11 – 0/17 VLAN 10 – Faculty/Staff 192.168.10.0 /24 Fa0/18 – 0/24 VLAN 20 - Students 192.168.20.0 /24 Fa0/6 – 0/10 VLAN 30 - Wireless 192.168.30.0 /24

Các file đính kèm theo tài liệu này:

  • pdfbai_giang_thuc_hanh_ccna_3_number_2.pdf
Tài liệu liên quan